150L Pulse Vacuum Autoclave Steam Sterilizer for Hospitals

150L Pulse Vacuum Autoclave Steam Sterilizer for Hospitals 

Model:MCF-SS05

Application:

This pulsing vacuum pressure steam autoclave is designed for the sterilization of thermoduric instrument, textile, latex, rubber and glasses. For culture medium and liquid, operator can choose the gravity exhaust mode. It is widely applicable for the hospital, research lab, agricultural tissue culture factory and food factory.

Features：

Vacuum drying function: With vacuum pump and air ultrafilter, more than 99% moisture can be exhausted.

Thermal insulation effect: Adopting the creative heat-insulating technology, the surface temperature of sterilizer observably reduces significantly to less than 45℃ during the sterilization cycle.

Water-steam recycling: The built-in steam converter and recycling pump would fully recycle the condensation water in the jacket vessel, so as to save water.

Energy conservation: By means of the outstanding insulation effect and water-steam recycling, the sterilizer reduces energy consumption significantly, compared with the market products Security system

Security password: The safety protection with three levels of security password guarantees the operating authority for start-up, modification of sterilization parameters and reprogramming of equipment parameter.

Self-diagnostic system: While fault occurs (such as lack of water, over-pressure, over-temperature, over-voltage or the fault of vacuum pump), the self-diagnostic system can detect it in time and the alarm device would start up. Meanwhile, the power would be cut off immediately to cancel the sterilization cycle.

Safety relief valve: As the pressure in the inner chamber or jacket is too high, the valve would open to exhaust the excess vapour in mandatory.

Emergency valve handle: To quickly exhaust the vapour in an emergency.

Interlocking function: The door could be opened only when the inner vapour pressure returned to atmosphere.